Connect Garmin network on Peplink BR1

Connect a Garmin network to your BRNKL using a VLAN on a Peplink BR1 series router.

To connect Garmin network, follow these steps:

A | Connect networks to Peplink

On the Peplink router:

• Connect the BRNKL-connected local network to port LAN 1.
  

  

• Connect the Garmin network to port 2.
  

  

B | Set up local network

Using your browser device, on the BRNKL-connected local network:

1. Sign in to the Peplink Web Admin webpage.
   

   

2. From Network, go to the LAN menu, then select Network Settings.
   

   

3. In the LAN list, select the Untagged LAN network.
   

   

4. In the network Name setting, enter a descriptive name such as BRNKL network.
   

   

5. Save changes.
   

   

C | Create VLAN

In Peplink Web Admin:

1. Below the LAN list, select New LAN.
   

   

2. In the new LAN settings, enter the IP Settings:

• IP Address: 172.16.6.200

• Subnet mask: 255.255.0.0
  

  

1. 1. In Network Settings, enter or select the following:

• Name: Garmin VLAN

• VLAN ID: 2

• InterVLAN routing: (turn on)

• Captive portal: (leave disabled)
  

  

1. In DHCP Server, make sure DHCP Server is disabled.
   

   

2. Save settings.
   

   

3. Apply Changes.
   

   

D | Set up Garmin network port

In Peplink Web Admin:

1. From Network, go to the LAN menu, then select Port Settings.
   

   

2. From the port selector, select port 2.
   

   

3. In Port 2 settings, enter the following:

• Name: Garmin network

• Enable: (turn on)

• Speed: Auto

• Port type: Access

• VLAN Networks: Garmin VLAN (2)
  

  

1. Save settings.
   

   

2. Apply Changes.