Connect Garmin network on other Peplink router

Connect a Garmin network to your BRNKL using a VLAN on a Peplink MAX BR2 or similar Peplink router.

To connect Garmin network, follow these steps:

A | Connect to Peplink

On the Peplink router:

• Connect the BRNKL-connected local network to an available LAN port.

  

• Connect the Garmin network to an available LAN port.

  

B | Set up local network

Using your browser device, on the BRNKL-connected local network:

1. Sign in to the Peplink Web Admin webpage.

   

2. From Network, go to the LAN menu, then select Network Settings.

   

3. In the LAN list, select Untagged LAN network.

   

4. In the network Name setting, enter BRNKL network or another descriptive name.

   

5. Save changes.

   

C | Create VLAN

In Peplink Web Admin:

1. Below the LAN list, select New LAN.

   

2. In the new LAN settings, enter or select the following IP Settings:

   • IP Address: 172.16.6.200

   • Subnet mask: 255.255.0.0

   

3. In Network Settings, enter or select the following:

   • Name: Garmin VLAN

   • VLAN ID: (enter Garmin port number)

   • InterVLAN routing: (turn on)

   • Captive portal: (leave disabled)

     

4. In DHCP Server, make sure DHCP Server is disabled.

   

5. Save settings.

   

6. Apply Changes.

   

D | Set up Garmin network port

In Peplink Web Admin:

1. From Network, go to the LAN menu, then select Port Settings.

   

2. From the port selector, select the port connected to the Garmin network.

   

3. In Port settings, enter the following:

   • Name: Garmin network

   • Enable: (turn on)

   • Speed: Auto

   • Port type: Access

   • VLAN Networks: Garmin VLAN (port number)

   

4. Save settings.

   

5. Apply Changes.