Contents x
    Set laser sensor connection
      • Print
      Contents

      Set laser sensor connection

        • Print
        Article summary

        Set a wired channel on your BRNKL to act as a laser sensor connection.

        To set laser sensor connection, follow these steps:

        A | Open channel settings

        Using your browser device, on the BRNKL-connected local network:

        1. Go to the BRNKL device webpage, select Settings img settings icon.

          img brnkl device settings(2)

        2. From the Devices menu select Inputs.

          img settings devices nmea 2001

        3. In INPUTS, find the channel (1-7) used to connect the device to the BRNKL.

          img select wired input channel

        4. Select the channel to open settings. 

          img wired input channel settings

        B | Name channel

        In the selected channel settings:

        1. Replace the default Name with a descriptive name.

          • Use 12 or fewer characters.

            img enter new name

        2. Save.

          img settings nmea 2000 save(1)

        C | Set connection to laser sensor

        In the selected channel settings:

        1. In Input type, select Laser.

          img set laser sensor connection

        2. Save.

          img settings nmea 2000 save(1)

        What's Next