Set up FLIR M300-series visible feed
- Print
Set up FLIR M300-series visible feed
- Print
Article summary
Did you find this summary helpful?
Thank you for your feedback
Set up a visible video feed from a FLIR M300-series camera to work with your BRNKL.
Prepare camera before connecting to your BRNKL.
To connect visual feed, follow these steps:
A | Connect camera
Using a browser on a device connected to the same network as the BRNKL:
- Open BRNKL Device Manager, then select Settings
..png)
- Select Cameras.
- Select + Add camera
- From Available cameras, select the camera you want to add.
- Enter camera settings:
- Camera name: (describe location or view)
- Username: (enter camera webpage Username)
- Password: (enter camera webpage Password)
- Select Add.
..png)
B | Modify RTSP URL
In BRNKL Device Manager:
From
Settings, go to Devices, then select Cameras.
From the list of cameras, select the camera source of the video stream you want to add.
In the selected camera RTSP URL setting, replace /ir.0 with /vis.0.
Save settings.
