Set up FLIR M400-series thermal and visible feeds
- Print
Set up FLIR M400-series thermal and visible feeds
- Print
Article summary
Did you find this summary helpful?
Thank you for your feedback
Set up thermal and visible video feeds from a FLIR M400-series camera to work with your BRNKL.
Prepare camera before connecting to your BRNKL.
To connect thermal and visual video feeds, follow these steps:
A | Set up thermal feed
Using a browser on a device connected to the same network as the BRNKL:
- Open BRNKL Device Manager, then select Settings
..png)
- Select Cameras.
- Select + Add camera
- From Available cameras, select the camera you want to add.
- Enter camera settings:
- Camera name: (describe location or view)
- Username: (enter camera webpage Username)
- Password: (enter camera webpage Password)
- Select Add.
..png)
B | Copy RTSP URL
In BRNKL Device Manager:
From
Settings, go to Devices, then select Cameras.
From the list, select the camera that you want to connect again.
In camera settings, find and copy the camera RTSP URL.
C | Set up visible feed
In BRNKL Device Manager:
From
Settings > Cameras, select
Add camera.
Below the list of Available Cameras, find and select
RTSP URL.
In RTSP URL, paste or enter the RTSP URL copied from the camera thermal video feed.
At the end of the pasted URL, replace /ir1 with /dltv1.
In Name, enter a description of the camera location or view.
Select Add.
Add camera.
