Prepare Cam300
- Print
Prepare Cam300
- Print
Article summary
Did you find this summary helpful?
Thank you for your feedback
Prepare a Raymarine Cam300 camera to work with your BRNKL.
Expert procedure
To prepare Cam300, follow these steps:
A | Find camera IP address:
Using a Windows computer connected to the same Raymarine network as the camera:
Open ONVIF Device Manager, or a similar utility.
Go to Device list.
Find the Cam300 camera you want to add to your BRNKL.
Make note of the camera Address, beginning 198.18.xxx.yyy.
B | Open camera webpage
Using a browser connected to the same Raymarine network:
In the address bar, enter the camera IP address.
On the login page, enter the following:
ID: admin
PASSWORD: 1234
Select LOGIN.
Select SETUP.
C | Set stream settings
Go to CAMERA, then select Stream Format.
In First Stream Setting, set Frame Rate to 20.
Set Bit Rate to 2.4 Mbps (2400000 bps).
Save settings.
D | Set network settings
Go to NETWORK, then select Network Setting.
Enter the following settings:
IP Type: Select Static
IP Address: 198.18.6. _ _
Assign a unique host portion (_ _ ), within the range of 50-90, and make note of the full IP address.
Subnet Mask: 255.255.0.0
Default Gateway: 198.18.6.200
Save settings.
