Set up bilge pump activity
- Print
Set up bilge pump activity
- Print
Article summary
Did you find this summary helpful?
Thank you for your feedback
Set up your BRNKL to monitor, report, and record bilge pump activity.
To set up bilge pump activity, follow these steps:
A | Open activity settings
Using your browser device, on the BRNKL-connected local network:
Go to the BRNKL device webpage, select Settings
..png)
In DEVICES, find and select the activity source.
BRNKL displays the related activity settings.
..png)
B | Set up bilge pump monitoring
In the selected Bilge activity settings:
To display bilge pump status, turn on Monitor.
BRNKL will display bilge pump status:
On the BRNKL webpage Dashboard.
In the BRNKL mobile app, updated every 15 minutes.
.png)
To display the number of recent bilge pump events, turn on 24 hour count.
BRNKL will display the number of bilge pump events in the past 24 hours:
On the BRNKL webpage Dashboard.
In the BRNKL mobile app, updated every 15 minutes.
Save when complete.
.png)
C | Set up bilge pump activity alerts
To report bilge pump events, turn on Alert.
BRNKL will send alerts when the bilge pump is active for a specified duration and frequency.
.png)
To find out about events while BRNKL is Disarmed, turn on Critical Alert.
BRNKL will send alerts while Armed or Disarmed.
To change the duration of a pumping event, enter a new Bilge on time value.
To change the frequency of pumping events for Long period alert or Short period alert:
Enter a new time period.
Enter a new limit for the frequency of pumping events.
Save when complete.
.png)
D | Set up bilge pump activity recording
To record bilge pump activity, turn on Record.
BRNKL will record and store bilge pump activity data.
.png)
Save when complete.
.png)