Set up FLIR M400-series visible feed
- Print
Set up FLIR M400-series visible feed
- Print
Article summary
Did you find this summary helpful?
Thank you for your feedback
Set up a visible video feed from a FLIR M400-series camera to work with your BRNKL.
Prepare camera before connecting to your BRNKL.
To set up visual feed, follow these steps:
A | Connect camera
Using a browser on a device connected to the same network as the BRNKL:
- Open BRNKL Device Manager, then select Settings
..png)
- Select Cameras.
- Select + Add camera
- From Available cameras, select the camera you want to add.
- Enter camera settings:
- Camera name: (describe location or view)
- Username: (enter camera webpage Username)
- Password: (enter camera webpage Password)
- Select Add.
..png)
B | Modify RTSP URL
In BRNKL Device Manager:
From
Settings, go to Devices, then select Cameras.
From the list of cameras, select the camera source of the video stream you want to add.
- At the end of the pasted URL, replace /ir1 with /dltv1.
Save settings.
