Prepare FLIR M500-series camera
Prepare a FLIR M-series camera to work with your BRNKL.
Install camera before preparing.
To prepare FLIR M-series camera, follow these steps:
A | Open camera webpage
Using browser device connected to the same network as the camera:
Check the camera manual for instructions to open the camera webpage.
Following the instructions, make note of the Username and Password.
B | Set thermal stream settings
Modify the camera thermal stream settings to limit the recording file size:
From FLIR menu, select Video.
Select T1 (Thermal 1).
Set the following stream settings:
Frame Rate: 20
Bit Rate: 3000 KBPS
Enable Multicast: No
SAVE.
C | Set visible stream settings
Modify the visible stream settings to limit the recording file size:
From FLIR menu, select Video.
Select V1 (Visual 1).
Set the following stream settings:
Frame Rate: 20
Bit Rate: 3000 KBPS
Enable Multicast: No
SAVE.
