Powering the BBP | BRNKL Knowledge Base

The BRNKL Black Portable can be powered using multiple methods.

General Power Guidelines

Always verify your power source meets the input requirements before connecting.
Never connect more than one power source at the same time.
Ensure the correct internal barrel jack is connected before applying power.
Use the provided Velcro straps to secure internal power banks during operation.
Power sources should support ≥60 W output to handle peak demand.
The BBP typically draws ~10 W but consumption increases when:
- Camera IR lights are active.
- The internal BRNKL Black battery is charging.

Accepts 10–30 V DC from the vessel's DC supply or an external DC power source.
Located on the side of the lid.

Accepts USB-C PD sources rated for ≥60 W output.
Can be connected internally or via the passthrough bulkhead port on the lid.
Compatible with USB-C wall adapters and USB-C PD power banks (power bank not included).

There is an internal barrel jack connection that must be swapped between the DC input and the USB-C PD cable.
To switch:
1. Open the case (do not disconnect any other cables).
2. Locate the internal barrel jack connection.
3. Disconnect from the DC input and connect to the USB-C PD cable, or vice versa.
4. Apply power and check that the components have powered up successfully.

Connect the internal USB-C PD cable directly to the power bank.
Secure the power bank with the provided Velcro straps.
To charge the power bank without removing it:
- Connect a USB-C cable from the bulkhead USB-C port to the power bank input port.