Skip to main content
Skip table of contents

Prepare Axis Camera

Prepare an Axis network camera to work with your BRNKL Black.

Install Axis camera before preparing.

A | Find camera IP address

Using a switch/router interface or AXIS IP Utility on the same network as the camera:

  1. Go to Devices or Clients.

  2. Find the camera you want to add to your BRNKL.

  3. Make note of the camera IP address.

B | Open camera webpage

Using a browser connected to the same network as the camera:

  1. In the address bar, enter the camera IP address.

  2. On the camera Welcome page, do one of the following:

  • If the camera was set up previously, LOGIN using root or other account.

  • If prompted, set a password for the default root account and CREATE LOGIN .
    Make note of the password.

C | Add ONVIF user

  1. From Settings, go to System, then select ONVIF.

  2. Go to ONVIF users, select

    to add a user.

  3. Enter the following user settings:

  • Username: root

  • Password: (same password as camera webpage LOGIN)

  • User group: Administrator

Save settings.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.