Skip to main content
Skip table of contents

Set battery connection

Set a wired channel on your BRNKL to act as a battery connection.

To set battery connection, follow these steps:

A | Open channel settings

Using your browser device, on the BRNKL-connected local network:

  1. Go to the BRNKL device webpage, select Settings img settings icon.svg

    img brnkl device settings(1).png

  2. From the Devices menu select Inputs.

img settings devices nmea 2001.png

  1. In INPUTS, find the channel (1-7) used to connect the device to the BRNKL.

img select wired input channel.png

  1. Select the channel to open settings. 

img wired input channel settings.png

B | Name channel

In the selected channel settings:

  1. Replace the default Name with a descriptive name.

    • Use 12 or fewer characters.

      img enter new name.png

  2. Save.

    img settings nmea 2000 save.png

C | Set connection to battery

In the selected channel settings:

  1. In Input type, select Battery.

  2. Save.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.

Contact Support Close